As long as both amps are grounded to the same spot you should be able to avoid ground loop. Runing to a distro or running both grounds to the same spot ends up with the same result.

Can you connect 2 amps to the same ground?

The short answer is that you can use any number or combination of power amps in a car audio setup as long as you wire them in properly. The most common reason to wire in multiple amps is to have one for your main speakers and a second amplifier for a subwoofer.

Should I ground my amps separately?

Current flowing through the chassis of an amplifier (or another audio device) can, and most often will, induce a ground loop. Therefore, it is best for the chassis to be ground to earth at a single point only. Note that it is actually rare for two separate grounds to have exactly the same electrical potential.

Can I run 2 amps off 1 power cable?

As long as the cable/fuse can handle it, that will work just fine. It would be more professional if you setup a distribution block instead of running them in series though.

How do I run 2 amps together?

0:3412:04How to hook up 2 amplifiers or more (read description) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd one for your highs. So lets get started with a two for base. Alright. So this is what you wouldMoreAnd one for your highs. So lets get started with a two for base. Alright. So this is what you would do that would be your head your front. And this would be your main power wire running through your

Are dual amps any good?

This amp is great. It puts out clean and consistant power and runs extremely quiet and cool. Had never tried any products from Dual but I was pleasantly surprised by this amp. Would recommend this amp highly as a good entry level addtion to your sound system.

Can you ground a capacitor and amp together?

Use the same gauge wire as the amp uses for its power. The negative pole of the capacitor connects to your chassis ground, just like the amp. The best practice is to use the same bolt the amp uses for ground.

How do I make my amp ground better?

The best way to ground your car stereo components is to run a 10 or 12-gauge wire from the amp, and 12-gauge from all other components, such as head unit and active crossovers, to a central location. Then run a single ground to the best source of ground, the negative terminal on your cars battery.

Can I ground my capacitor to my amp?

You ground both the amp and the cap to a single point on the chassis. You do NOT ground the amp to the caps negative post. The only wire going from the cap to the amp should be +.

Does bridging an amp give more power?

Bridging an amplifier increases the power that can be supplied to one loudspeaker, but it does not increase the amplifiers total available power. Because a bridge amplifier operates in mono mode, a second identical amplifier is required for stereo operation. For bridged amplifiers, damping factor is cut in half.

What amp is best for mids and highs?

1. Rockford Fosgate 4 Channel amp for mids and highs. The Rockford Fosgate Cartoon P400X4 is the best and most advanced version of the classic A / B audio technology, this is the best 4 channel amp for mids and highs AMP cheaper and has many other features.

Will a bad ground make your AMP hot?

There are several different reasons that an amplifier will get hot and shut down. Four of the most common are: Blown/grounded speaker(s), poor power and/or ground connections, too low an impedance (load), or Gain/Punch Bass control settings too high.

Will an amp power without ground?

a bad ground (or no ground) would prevent an amplifier from turning on. not connecting a 12v+ remote turn on wire, would too, prevent an amplifier from turning on. a blown fuse from a spark will prevent an amplifier from turning on. just a personal note: take off the ground (from the battery) first before installation.

Will a capacitor make my subs louder?

A: Not really. A cap prevents the sound from deteriorating due to under-voltage, but doesnt actually improve the sound. It supports the amplifier by feeding it the power it needs for short bursts. So, while not improving sound quality directly, a cap does make it easier for the amp to perform its best.

Is bridging an amp bad?

The only drawbacks of bridging an amplifier is that the amplifiers damping factor is reduced resulting in a loss of sound quality (some people believe that this loss is inaudible).

How many amps can I daisy chain?

Daisy-chaining is the functional equivalent of using a Y-cord to split a signal so the same signal can be sent to more than one amp channel. Its usually done with 2 or more parallel input connectors on the amp.