Question: Does it matter if roman blinds are too long?

A roman shade will add a touch of style and elegance to any room. Approaching the problem of roman shades that are too long is not difficult. If you have roman shades that you love but they dont fit the length of your window, you can easily make an adjustment and provide some cost effective budget decorating.

Is it OK if blinds are too long?

Horizontal blinds that are too long look bad, but also create a serious safety hazard for young children. Fortunately, shortening them is easy—all you need are scissors and a screwdriver.

How long can a Roman blind be?

We therefore, recommend that the maximum size of a roman shade be 72” wide x 72” in length or a combination that equates to a similar square footage.

Can Roman blinds be longer than window?

If the choice is for blinds, we advise to ensure you measure the window width and drop, while adding at least 6.5cm extra on each side of the window. The more you can have added to the sides, the less light bleed into the room.

Can you shorten a roman blind?

Shortening Roman Blinds Due to their nature, roman blinds are a bit more tricky to trim down and can only be trimmed lengthways due to how they work, attempting to trim width ways may interfere with the cords so we dont recommend it.

What to do if your blinds are too long?

0:001:46How to Shorten Wood and Faux Wood Window Blinds | The HomeYouTube

How much longer should your blinds be?

Youre not measuring the width of the window itself necessary. Youre measuring the window you would like the blinds to cover. If you wish to maximize privacy and light control, plan the set of blinds to extend as much as three inches beyond both sides of the window.

What is the maximum drop for a roman blind?

240cm Any size is available up to a maximum width of 250cm and maximum drop of 240cm. Minimum width is 25cm. If a blind requires more than one width of fabric, the blind will be made with a wider central panel and a smaller pattern matched panel at each side.

How far do Roman blinds hang down?

However, for small or low windows, a roman blind may cover too much of the glass. Roman blinds will cover 22cm-30cm or so in the pulled up position.

How do you shorten a Roman blind track?

Recommendations for trimming a cassette kitUsing the chain, wind down the cords so that they drop to the full length. Then simply cord up your Roman blind and attach it to the headrail.If you have not used the full length of the cord then simply cut this with scissors. This will remove any unwanted hanging cord.15 Mar 2021

How do you shorten the width of a blind?

Cutting down the slatsAlign the slats so that they are even.Using a clamp or rubber bands, secure the slats together into position.Wrap the slats with masking tape to prevent chipping.Measure where you want to cut and mark a line with your pencil. Lay them on the saw and line up the blade where you need to cut.More items

How can I shorten my blinds without a cord?

0:473:20Lumino 2 Faux Wood Cordless Shortening Guide - YouTubeYouTube

How do you shorten 2 inch blinds?

0:061:29How To Shorten Wood and Faux Wood Blinds | Blinds.com - YouTubeYouTube

How wide should your blinds be?

If you want your blind to fit flush with the window molding you need to make sure you have enough depth in your window to accommodate the width of the headrail (each style of blind will need a different amount of depth to fit flush but as a general rule for blinds go horizontally across your window you will need 1 to

How far should blinds be from window sill?

In general, we suggest leaving around 10cm above the window recess and at least 7cm on each side. Then decide on the best place for the blind to end – on or just below the window sill often works well, but it may look better longer.

Write us

Find us at the office

Kyker- Kublin street no. 42, 51864 Pretoria, South Africa

Give us a ring

Carnell Mckean
+65 937 708 93
Mon - Fri, 10:00-20:00

Contact us