Question: How do you set up a pool pump?

How do you prepare a pool pump?

Priming your pool pump is important, but a relatively simple task.Turn off the pump. Switch to recirculate. Release air. Clean out the pump basket. Fill the pump basket. Once the pump basket is filled and tightened, make sure the air release valve is open and turn the power to the pump on.More items

Can pool pump run without water?

Can I run my pump without water? This seal assembly gets hot and is cooled by the pool water. If the pump is running without water, the seal will overheat and melt, If left running without water for a long period of time, the heat generated could damage the PVC pipe and other system components.

What chemicals do you put in a pool first?

Chemicals Needed for Pool Start UpsStain & Scale Preventer.Granular Shock Chlorine.Chlorine Tablets.pH Increaser and/or pH Decreaser.Alkalinity and/or Calcium Increaser.Cyanuric Acid (Stabilizer)Algaecide and Clarifiers if needed.Complete Test Kit or Test Strips.

How often should you put chlorine in pool?

twice per week Q: How Often Do I Need to Add Chlorine to Pool? A: During the swimming season, you should check the chlorine level at least twice per week. The ideal chlorine level should be between 1 and 3 ppm.

Should my pool pump always be on?

Although its generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. If your pool is in constant use, you may need to run the pump for up to eight hours per day, frequently checking the water clarity and chemical balance.

Write us

Find us at the office

Kyker- Kublin street no. 42, 51864 Pretoria, South Africa

Give us a ring

Carnell Mckean
+65 937 708 93
Mon - Fri, 10:00-20:00

Contact us