All wood pellet stoves require a 13amp electrical connection. For other stoves just bring the duct right up to the front of the stoves where the air exit the heat exchanger. That will also work well!

What kind of vent do you need for a pellet stove?

Pellet stoves require type “L” vent pipe. Most will have a 4” vent pipe requirement. L-vent uses an air space between a stainless steel inner pipe and a galvanized outer pipe. Since the exhaust on pellet equipment is pressurized, all joints between pipe components must be siliconed or have a gasketed/sealed connection.

Can you vent a pellet stove to an existing chimney?

A: You can vent a pellet stove either through a wall or through an existing masonry chimney. Some chimneys also require the installation of an approved metal liner that the pellet stove vent pipe passes through.

How do I get the most heat out of my pellet stove?

2:002:47How to get more heat from your Pellet Stove - YouTubeYouTube

Can I put a TV over a pellet stove?

Installing a TV directly above a wood stove isnt typically recommended, but if a TV will be sufficiently protected from the heat of a wood stove it may be suitable. TVs should be placed outside of clearance distances to combustibles, and a mantel can help protect a TV from the heat.

What is the best setting for a pellet stove?

It is best to run the appliance on the lower heat settings like 2 or 3 rather than up at 4 or 5. The higher heat settings result in lower efficiency and the appliance cycling from high to pilot fire too often.

Can a pellet stove operate without electricity?

Pellet stoves require a source of electricity in order to operate. Without an alternative source of power, the stove will be unable to turn on or ignite.

How do I increase the airflow in my pellet stove?

Pull out on the handle or rod slowly if you have a tall, slow burning flame. Pulling the handle out from the stove increases the amount of air inside the stove. Continue to pull out on the handle until youre satisfied with the amount of air inside the stove, and the flames burn normally.

Can you put a pellet stove on carpet?

The stove must be set onto a fire-resistant surface, such as tile or stone. So if the room has hardwood, vinyl, carpeting, or any other combustible flooring, the stove has to be set onto an approved hearth pad. Install a ceiling fan in the room with the pellet stove.