There is really no limit to how far the equipment can be from the pool but there are consequences. The longer the runs, the more head loss there is in the plumbing and the less efficient the pump will be. You can compensate some by using larger pipes and/or multiple runs.

How far away from pool should pump be?

Stay close to the pool Shorter pipe runs = less work for the pump which extends the life of the pump and uses less electricity. Our projects typically average a distance of 20–40 feet from the pool to the equipment, but as stated earlier, much longer runs are sometimes required.

Where should a pool pump be placed?

It is important to get a pump designed for above-ground pools because they are usually placed below the pools waterline. Pumps for in-ground pools are placed above the waterline. Most above-ground pumps run full speed all the time, but two-speed models are more energy efficient.

Can you put a pool pump under a deck?

Build a separate structure to protect your pool equipment. Many people opt to place their pumps and filters beneath their above ground pool deck. Instead, situate your equipment to the side of your deck. If you dont want it exposed, build a smaller structure to contain your pumps, filters, and equipment.

How far does my pool have to be from my house?

National and Local Requirements There is a national standard that requires that all swimming pools must be at least 10 feet away from the house walls. As mentioned, this will protect electrical wiring from leaks, floods, and splashes.

How do I quiet my neighbors pool pump?

You can reduce pool pump noise by; 1 – replacing the bearings; 2 – Placing a vibration pad underneath the pump; 3 – raise the water level in the pool; 4 – Building or buying a pool pump quiet box; 5 – Keeping the skimmer and debris basket clean; 6 – Clean the impeller; 7 – Make sure the pump is full of water by looking

How big should the gap be between a pool and a deck?

The maximum gap between the decking and the pool coping is generally 3/4 inch. Slip resistance, gaps between boards and slope of the deck may also be regulated depending on the local codes. These design requirements should also be considered for any deck adjacent swimming pools or hot tubs, whether in or above ground.

What is the pool coping?

WHAT IS POOL COPING? Coping is the term used to identify the material used to cap the pool edge or shell wall. Options available are poured-in-place concrete, precast concrete, tile, and natural stone (pavers, flagstone, etc.). Find concrete pool deck contractors near me.

Is there a law that you have to have a fence around the pool?

A wall, fence or other barrier must surround the pool area and applies to both above ground and inground pools. This law applies unless a local law has a different requirement. The wall, fence or barrier must: Be a minimum of 20 inches from the water/edge of the pool.

Can you put a pool next to house?

Distance from The House and Other Structures Most municipalities require swimming pools to be as much as 25 feet away from the house, property line or other structures. Check with your local regulators to find out exactly what the rules will be for you.

Why is the pool pump loud?

One of the most common causes for a noisy pump is that its running dry. If your pool water level has fallen below halfway on the skimmer faceplate, your pump might be sucking in air as well as water. This puts more strain on the pool pump, causing it to work harder—and louder.

Are pool pumps noisy?

Pool pumps sometimes make grinding noises. This can sound like stones rattling inside the pump, or it can sound a little like a coffee grinder grinding beans. Again, this sound can be a sign that your baskets need cleaning out. Grinding sounds are often from a lack of water moving through the pump.

Should you leave gaps between decking?

When installing decking boards, make sure to leave 1/4 to 1/8 inch gaps in between them. This gap will make sure that the deck can breathe, have sufficient drainage, and make it easier to clean. For the gaps, you can use different tools to help you. Some use a 16-penny nail as a reference for the gaps.