If you have a phono input, plug your turntable in there – you wont need a phono pre-amp. If thats the case plug the turntable into a spare input, like the auxiliary or aux ports. Dont plug it into a phono input or you may blow your speakers up.
Can you connect AUX to phono?
Yes, the aux input on a receiver can be used for phono, but only if you use a stand alone phono preamp for your turntable or if your turntable has a built in phono preamp.
P. (PHONOgraph input) A socket on an amplifier or receiver that accepts signals from an analog turntable. The phono input circuit boosts the signal and provides the RIAA equalization necessary to restore the original sound. See phono preamp and USB turntable.
There are two main differences between PHONO and LINE. Firstly, a PHONO signal is much weaker than a LINE signal. A PHONO signal is typically 0.005 Volt and a LINE signal is typically 0.3 Volt. This is due to the low signal level and the reduced bass of the PHONO signal.
AUX connections (input or output) Alongside the inputs for various players such as Blu-ray players and connections for the speakers themselves, the most important input on the amplifier or compact system is called AUX or auxiliary. This is simply an audio input to which you can connect players of your choice.
0:382:24Explaining Phono & Line Inputs | Bop DJ - YouTubeYouTube
Just make sure you never plug a CD player into a Phono input on a receiver or pre amp. I have seen people blow ICs on receivers from doing that. The input for a phono is usually a low level input and the output from a CD player is usually a high level output.
Is RCA same as phono?
The RCA connector (or RCA Phono connector or Phono connector) is a type of electrical connector commonly used to carry audio and video signals. The connectors male plug and female jack are called RCA plug and RCA jack.
Do I set turntable to phono or line?
0:341:54Tutorial Tuesday - Phono and Line Switch on Turntable - YouTubeYouTube
Is AUX and 3.5 mm the same?
The construction of the aux connector and the headphone jack is often the same: 3.5mm (1/8″) TRS. However, the “auxiliary connector” is universal for audio while the “headphone jack” is, by its name, suited for headphones.
Can you convert AUX in to AUX OUT?
no, an input cant be changed to an output. its not wired that way inside.
How do I connect my turntable to a CD player?
I simply connect the RCA cable from the turntable to one of the LINE inputs on my receiver. In the example below, I have connected the RCA connector from the turntable to the CD input on the receiver. To play records with this setup, I select CD on the source selector on my receiver.
Do CD players need a preamp?
If you have an AV receiver with an integrated preamp, you dont need a dedicated pre-amplifier. Do you need a pre-amplifier? If you have several different sources to connect, such as a turntable, CD player or Network Audio player, then yes. The more sources you intend to connect, the more a pre-amplifier benefits you.
How do I connect my soundbar to my Bluetooth turntable?
Connect the turntable audio cables to the separate phono preamp, and any other wire your turntable has. Then, connect the phono preamp audio cables to the receivers analog inputs (your soundbar) Finally, connect the phono preamp to its power supply and switch on.
Can turntable connect to home theater?
To connect your turntable to a home theater setup, you need a phono preamp. This device correctly equalizes the turntables audio signal. Itll either be built into the turntable or the receiver, or youll need to buy a separate device.