Question: Where is the ice maker switch on a Kenmore refrigerator?

The location of the water inlet valve depends on the manufacturer but Kenmore ice maker and Whirlpool ice maker water inlet valves are typically located behind your refrigerator. Before checking on the valve, unplug the refrigerator and turn off the valves water supply.

How do you reset the ice maker on a Kenmore refrigerator?

0:242:58How to Fix an Ice Maker on a Kenmore Refrigerator - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn off the ice maker unplug. The fridge or turn it off at the breaker. Wait for power to dissipateMoreTurn off the ice maker unplug. The fridge or turn it off at the breaker. Wait for power to dissipate in the unit. Thats. Usually five minutes then reconnect the fridge. And turn on the ice maker.

How do you turn on the ice maker on a Kenmore refrigerator?

According to page 17 of the owners manual to your refrigerator, you will need to raise the lever on the ice maker up to turn the unit off, or down to turn the ice maker on.

Where is the icemaker switch located?

This icemaker design has an ON/OFF switch similar to a light or power switch. ON is at the top of the toggle switch while OFF is at the bottom of the toggle switch. This type of icemaker is found on many different styles of refrigerator. To turn ON the icemaker, set the power switch to I (ON).

Why is my ice maker not working Kenmore?

A Kenmore ice maker that is not filling with water may have a frozen or clogged water line. Check the water lines in the back of the refrigerator to see if there is a visible kink or clog from the hard water that flows from the house line system. Flush the lines with a solution of one-part vinegar and one-part water.

Why would an ice maker stop working?

If your ice maker isnt producing ice at all or is producing crescents or cubes that are smaller than usual, its typically indicative of a clog somewhere along the supply line. Cause: A common cause for a clog is frozen water in the line. Fix: To repair a frozen line, slide the refrigerator and unplug it.

Why did my Kenmore ice maker stop working?

If the refrigerator ice maker is not working, check the icemaker switch. This switch frequently gets turned off by accident. If the switch is turned on but the ice maker still doesnt work, check the switch for continuity with an Ohm meter. Replace as needed.

Is it OK to turn ice maker off?

Just make sure your ice maker is turned off when theres no water flowing to it. Otherwise, the ice makers components will continue to run, which is a huge waster of energy and could damage the fridge.

Write us

Find us at the office

Kyker- Kublin street no. 42, 51864 Pretoria, South Africa

Give us a ring

Carnell Mckean
+65 937 708 93
Mon - Fri, 10:00-20:00

Contact us