Question: Can you connect 2 subs to a mono amp?

Sure, two subs will take up more room, but what do you want โ€” trunk space or bass? This setup is perfect for a mono sub amp. By wiring the two subs in parallel (see the diagram) youll show a 2-ohm impedance to the amp. Two 4-ohm SVC subs โ€” a great place to use a mono amp.

Can I use a mono amp for 2 subs?

Mono amplifiers are especially well-suited to wiring to two subwoofers. To wire two subwoofers to a mono amplifier, you need only know how to cut wire, use very simple tools and follow basic instructions.

How do you wire two subs to a mono amp?

How To Connect Two Subwoofers To a Monoblock Car Amplifer Connect two sets of red positive speaker wires into the (+) terminal on the amp. Connect two sets of black negative speaker wires into the (-) terminal on the amp. Attach one red wire into the (+) terminal on one subwoofer.More items

How many speakers can you connect to a mono amp?

You can connect more than two speakers in series--and the impedance will also add. So the impedance of one 8 ohm speaker and two 16 ohm speakers connected in series is 40 ohms.

Is it better to run subs in series or parallel?

While series wiring of multiple subs increases the total effective impedance, parallel wiring of multiple loads lowers the total effective impedance. With subwoofers rated at equal impedances, the system impedance is equal to the impedance of one sub voice coil divided by the number of subs.

Is 2 ohm or 1 Ohm better?

At 1 ohm, you will get more power output from your amplifier and your subwoofers will play louder than if you wired them to a 2 ohm load. You can also save some money by wiring your subwoofers to a 1 ohm load.

Is bridging bad for your amp?

This can result in greater distortion, less dynamics, and shorten the life of both your speakers and amp. Running 2 speakers in series across two bridged amp channels will present almost the exact same load as if you ran them in stereo with a single speaker on each amp channel.

Do Subs smell when breaking in?

A subwoofer should not smell when breaking in. When a subwoofer is breaking in, its suspension is simply loosening up as you play them. And that does not produce a smell.

Does bridging an amp make it louder?

Yep, the distortion specs generally get worse with bridged amps -- standard PA deal. Get a bigger amp. Note that a 50-watt amp is only 3dB louder than a 100-watt amp. You need ten times the power for an amp to sound twice as loud as a smaller amp.

Can you hook up two speakers to one terminal?

Summary of Connecting 2 speakers There are only really two ways to connect 2 speakers to one amplifier โ€“ either in parallel or series. If each speaker has an impedance of 8 ohms or more, then you can generally connect them in parallel.

Write us

Find us at the office

Kyker- Kublin street no. 42, 51864 Pretoria, South Africa

Give us a ring

Carnell Mckean
+65 937 708 93
Mon - Fri, 10:00-20:00

Contact us