Question: Can you plug a turntable directly into a receiver?

If your receiver does not have a phono input, dont worry – many turntables have their own built-in preamp. (You can verify this in the owners manual.) As long as this is the case, you can use any receiver input, such as the ones labeled “Line,” “Audio,” “CD” or “Auxiliary.”

Can you hook up a turntable to a receiver?

Simply plug the turntables audio signal cable into one of the receivers analog audio inputs. These inputs are oftentimes labeled Aux (auxiliary), Line In, Analog In, etc. You can even use your receivers CD or Tape input, if needed. No other connections are required.

How do I connect my turntable to my stereo?

0:272:01How to Connect a Fluance Turntable to a Home Theater A/V Receiver or YouTubeStart of suggested clipEnd of suggested clipAnd right audio inputs on the receiver connect the RCA cables to the audio outputs on the back ofMoreAnd right audio inputs on the receiver connect the RCA cables to the audio outputs on the back of the turntable in short each color is connected to the same channel on the turntable. And the receiver.

How do I connect my turntable to my speakers and receiver?

Turntable with Preamp, Receiver, and Passive SpeakersJoin the turntable to the preamp using one set of RCA cables.Join the preamp to the receiver using one set of RCA cables.Join the speakers to the receiver using the speaker wire.More items

How do I hook up an old turntable to my receiver?

How to Connect a Turntable to an AV ReceiverPlace your turntable directly next to your receiver. Connect the supplied RCA-type stereo cable to the output of your turntable. Look at the back of your receiver and examine the audio input options.More items •13 Nov 2018

Can I connect a turntable to Denon receiver?

Connect the Turntable cables to any available analog (Red and White) Audio input on your receiver. Use the Source Select knob or button on your AVR to select the input connector your Turntable is connected to. Note: Not all turntables have a ground wire.

Do you need a preamp with a receiver?

Here is the short answer. Most home theater receivers already have a preamp fitted, so a dedicated preamp isnt necessary. This is particularly true if youre just watching content. However, if youre a dedicated audiophile and want to get the best out of your setup, then a preamp would be a good investment.

How can I play my vinyl surround sound?

You just plug your red and white double-ended cables into the phono input on your receiver and you are good to do. Just make sure if your turntable has a preamp built in and so does your turntable, you do not plug it into the phono input! Instead, plug it into one of the other red and white inputs and you will be fine.

Can you connect a turntable directly to speakers?

You can connect your turntable directly to speakers if, and only if, your turntable ha s a built-in preamp and your speakers have a built-in amplifier. But if your turntable only has a PHONO output it will need to be hooked up to an external preamp. Or to a receiver with a preamp built in.

Do expensive turntables sound better?

There is a noticeable sound difference between a cheap and an expensive turntable. An expensive turntable has a sound that is more authentic, detailed, dynamic and engaging. But a cheap turntable does absolutely sound good enough to give an enjoyable music listening experience.

Can I use another receiver as a preamp?

A preamp boosts the signal from a record player or other non-amplified component to a level that can be processed on an AV receiver and heard on the speakers. An old stereo receiver can be used as a preamp with standard stereo cables and two tape-deck connections.

Write us

Find us at the office

Kyker- Kublin street no. 42, 51864 Pretoria, South Africa

Give us a ring

Carnell Mckean
+65 937 708 93
Mon - Fri, 10:00-20:00

Contact us