How do you replace a water heater supply line?

0:212:44How to Replace a Water Heater Flex - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust pull it off get two new supply line which is going to come out when you purchase its going toMoreJust pull it off get two new supply line which is going to come out when you purchase its going to be straight.

How do you connect PVC pipe to water heater?

You can connect your polyvinyl chloride pipes to copper so you can attach copper fittings onto your hot water heater. A special connector, called a PVC-to-copper adapter, is used to hold the two different pipes together and create a watertight seal.

Should I use Teflon tape on water heater supply lines?

For threaded pipe, you should have a union on both the hot and cold water lines. Use Teflon tape (but not pipe dope) on the male threads entering the flex-connectors. If your water heater has female-threaded tappings, youll need a pair of 3/4 nipples to accept the flex-connectors at the bottom.

Can you install a hot water heater yourself?

Installing a water heater is no average DIY project. You must have plumbing, electrical, heating and ventilating and carpentry skills, know state and local building codes, obtain a permit for the work and arrange with your municipality for an inspection of the work.

Can you use PVC pipe for hot water heater?

The main drawback to PVC pipe is the fact that it cannot be used with hot water applications. When exposed to hot water, PVC will warp. This means it cannot be used to deliver hot water to sinks, tubs and washing machines.

Can I use PVC to vent gas water heater?

A standard will be needed for plastic flue pipes that should include a temperature gauge and a high limit probe. Then PVC, CPVC and polypropylene flue gas piping can be safely used on high efficiency boilers and water heaters.

How many times do you wrap Teflon tape?

You only need to use 2-3 wraps of tape, however thinner tape may need 4-5 wraps. Make sure you start wrapping at the end of the fitting, covering the end to prevent the thread from seizing.

Can PEX be used for hot water?

PEX pipe is approved for residential and commercial hot and cold water distribution systems, municipal water service lines, radiant panel heating systems, hydronic baseboard heating systems, snow and ice melting systems and building services pipe.

What type of pipe is best for hot water?

CPVC is suitable for hot water and drinking water, unlike normal PVC. Compared with copper, CPVC pipes are smoother, and they produce less noise when water flows through. CPVC piping is also insulated to prevent energy loss, more flexible than metallic piping, and fire resistant.

Can I vent a gas water heater through a wall?

Venting. All natural gas water heaters must be vented to the outdoors to remove the byproducts of combustion. Atmospherically venting gas water heaters is the most common type of venting option used. The vents go directly through an outside wall, and can also bring in combustion air to the gas burner.